Toyota End-Controlled Rider Pallet Jack Skip to content
NEXT LEVEL LEASE EVENT | 4.99% LEASE RATE
NEXT LEVEL LEASE EVENT
En | Fr

Toyota END CONTROLLED
RIDER PALLET JACK

Request Quote Download Brochure

End-Controlled Rider Pallet Jack SPECIFICATIONS

Multifunction Control Handle with Ergonomically Angled Hand Grips and Wrap-Around Hand Guard

Dual Thumb Wheels with Twist Grips for Directional Control and Travel Speed

Intuitively Positioned Lift/Lower and Horn Buttons (Horn Button on 8TB50 Only)

Soft-Cushioned Rider Platform

Low Platform Step Height

The Toyota End-Controlled Rider pallet jack is easy to maneuver and quick to respond to commands. The End-Controlled Rider, ideal for longer runs, makes moving product throughout the warehouse efficient and enjoyable. Doubling as a ground-level order picker, the End-Controlled Rider pallet jack is an asset to any warehouse or distribution center.

END-CONTROLLED RIDER PALLET JACK SPECIFICATIONS

END-CONTROLLED RIDER PALLET JACK SPECIFICATIONS

MODEL NUMBER

LOAD CAPACITY* (LBS.)

MAX. TRAVEL SPEED FULL LOAD (MPH)

MAX. LIFT SPEED FULL LOAD (FPM)

MAX. GRADEABILITY FULL LOAD (%)

BASIC RIGHT ANGLE STACK** (IN.)

8HBE30

6000

6.5

N/A

10

85.4

8HBE40

8000

6.2

N/A

10

129.3

Overall Length
76.4 - 186.8 in
Height (Extended Handle)
56.7 in
Overall Width
36 in

Performance

  • 0

    EMISSIONS

  • 6.5

    MPH travel speed

  • 24

    Volt Motor

END CONTROLLED RIDER PALLET JACK Gallery

RECOMMENDED INDUSTRIES

Industries

Beverage

Industries

General Warehouse Solutions

Industries

Freezer & Food Storage

Popular Options & Accessories

Make the Most of Your Forklift with These Accessories

Suited for customers who move materials in and out of: cold storage facilities; chemical and salt and brine industries; or in areas where frequent wash down is required to remove contaminants.

Option provides rollers at the bottom of the battery compartment and dual side gates. Allows the battery to be rolled out from either right or left hand side of the truck.

Option replaces the standard pallet entry/exit slides with durable hard polymer pallet entry/exit rollers.

Option replaces the standard single polyurethane load wheels with “Double Boggie” style load wheels.

Option helps warn the operator if either left or right hand side battery side gate is left open.

An ABS plastic tray designed to carry pens, markers, tape, utility knife, paperwork and other various work materials.

Option replaces the standard maintenance free Teflon® coated PolylubeTM bushings at the lift linkage pivot points with greaseable bushings (grease fittings).

Various fork lengths and widths ranging from 32”x27” to 103”x22” *specific options available may vary based on model. Additional lengths and widths available through Toyota Special Design Request.

NEED MORE INFO?

Request A Quote Now

Contact Form










Contact Form










Download Brochure Form